The channel of each function can be changed.
Tap to move to the rate
switching CH setting page.
Holding Power C2 to C5
ON-OFF channel for auto
recovery
! 10 CH ON
< Model Menu (Airplane/Glider) >
177
SBUS Basic menu
SBUS Basic menu
WARNING
Always verify that the S.BUS function assignments
match your transmitterʼ s function (in the FUNCTION
menu) assignments. If any changes are made within
the transmitter function assignments, then it will also
be necessary to make the changes within the S.BUS
function assignments. To change the channel, GYA553
and T32MZ-WC must be connected.
Tap the CH used for rate switching
to select it.
Reset each S.BUS function. It
returns to the initial value.
output.
on the transmitter side.
performed and the data sent from the transmitter is output as is.