Table of Contents
Advertisement
Setting by curve type
original screen. Adjust each curve as described below.
Linear curve adjustment
RateA and RateB can be adjusted separately or
simultaneously.
*[Separate] mode:
separately.
*[Combined] mode:
simultaneously.
1. Select the setting mode.
*Initial value: +100.0%
The curve can also be offset horizontally in the
vertical direction and the rate reference point can be
offset to the left or right.
*Initial value: +0.0%
move the reference point to the
left or right.
*Initial value: +0.0%
＜ Data ＞
225
(Linear curve)
Advertisement
Table of Contents
