1
1. Select "Gyro setting" on the last page of
Airplane Model Menu
2
2. Select "Start"
3
XX
3. Home screen is displayed
◆ When copying data from Gyro A to Gyro B
Connect the gyro A to the T32MZ-WC and press [Start]. (Enter the data of A into T32MZ-WC)
If you press Start here, the B data will be download to the
T32MZ-WC and the A data will be lost.
Connect Gyro B to T32MZ-WC and press [GY Settings Transfer]. (Put data on A into gyro B)
< Model Menu (Airplane/Glider) >
170
SETTING
When "GY Settings Transfer" is
selected, the gyro setting data saved
in T32MZ-WC is written to the gyro.
Select "Start"
This will download the gyro data to
the T32MZ-WC.
To Basic menu
* At this time, if Gyro is not connected to
T32MZ-WC by wire, this screen appears.
Tap "Yes" to display the GYA553 data saved in T32MZ-
WC.