Table of Contents
Advertisement
Hovering pitch trim
The Hovering Pitch function trims the pitch near the
hovering point. Normally, it is used with the hovering
condition. The hovering pitch can be fine tuned for
changes in rotor speed accompanying changes in
the hovering pitch so that rotor speed is constant. This
function can be used together with the Hovering Throttle
Trim function for more delicate operation.
Setting method
can be selected.
CTRM mode:
NORM mode:
curve.
used near the center.
＜ Model Menu (Helicopter) ＞
181
High Pitch/Low Pitch Trim
High Pitch/Low Pitch Trim is the pitch servo high side
and low side trim function.
Setting method
center as the standard.
Advertisement
Table of Contents
