Table of Contents
Advertisement
Switch selection
screen below is shown.
When switch is selected
Switch ON/OFF setting is possible at each position.
Alternate:
depending on mixing function.
switch was selected, the screen shown below
appears.
*When the button of each position is touched, it
＜ Data ＞
230
(Switch selection screen example)
When stick, trim lever, or VR is selected.
the following 4 modes can be selected.
Mode: Lin/Sym
Type: Hysteresis (Hys.)/box (Box)
stick, etc. was selected, the screen shown
below appears.
2. Select the mode you want to use, and set it
as described below.
Advertisement
Table of Contents
