◆ MC-9130H/A telemetry connection example
◆ ESC telemetry display screen
The ESC status is displayed. Alarm setting is also possible.
◆ Warning state
< Linkage Menu >
115
*Futaba ESC(Telemetry compatible product)
To drive battery
◆
Current Voltage
an alert.
◆
Capacity RPM
◆
ESC Temperature
◆
Throttle
Throttle not at 0%
When the throttle stick is not low when ESC is started
Low voltage
When the battery voltage is below the cutoff voltage
Over temperature
When the ESC temperature is 110 °C or higher
Over current
Peak current over
Motor locked
When the motor locks
Throttle signal lost
When no throttle signal is received for more than 0.25 s
To CH3
Throttle
To free port
To S.BUS2
SBM-2
ESC
→
* T h e c u r r e n t a n d c a p a c i t y
c o n s u m p t i o n d i s p l a y m a y
vary depending on the usage
conditions, so use it as a guide.