Table of Contents
Advertisement
This function is used when you want to mix elevator
undesirable tendencies when rudder is applied in
roll maneuvers, knife edge, etc. of acrobatic planes.
items are displayed.
(For a description of the switch setting method,
conditions (When conditions are set)
＜ Model Menu (Airplane/Glider) ＞
165
operation (switch operation) is performed with correction
tuning)
*When call switch
were set
memorized. Memorization is performed while changing
and operation is simultaneously set.
Note: When memorized from manual before flight, be
sure that the memory SW is not accidentally set to
ON and incorrect mixing setting is not applied when
taxiing, starting the engine, etc.
adjustment
Advertisement
Table of Contents
