Table of Contents
Advertisement
Flight tune sets control of helicopter roll (aileron) and pitch (elevator) axis. "FLT.
＜ Model Menu (Helicopter) ＞
205
Flight Tune（Aileron / Elevator Basic settings）
Flight Tune（Aileron / Elevator Basic settings）
(1) Base. Gain: Gyro base gain setting
This sets the Cyclic Gyro Base Gain. If the Rotor Head Gain (Rot HD Gn)
Channels are set to "INH" within the CGY "SBUS.BASIC" menu, then the
remote transmitter gain adjustment is not available. Thus the actual
working gain for the cyclic gyros is set by using the "Base Gain" button
within this parameter.
Set to 100, a transmitter Gain value of 100% will display 100% on this
parameter. If a pilot is in need of more gain, base gain can be increased
to allow the gain on the CGY to be higher than 100%.
Note: If using a 6 CH or less "Base Gain" is equivalent to the rotor head
gain and can be adjusted manually on the gyro instead of via the trans-
mitter.
Setting ranges: 0 ~ 150% Initial value: 100%
(2) CYC. Rt: Cyclic rate setting
Cyclic rate sets the maximum Cyclic rate sets the maximum roll and flip
rate (d/s) as limited by the modelʼ s ability to reach that set rate. Flip and
roll rates are set together with this single parameter.
Setting ranges: 10 ~ 500 d/s Initial value: 300 d/s
Cond
Cond
Advertisement
Table of Contents
