Toggle Switch - FUTABA 32MZ-WC Full Manual

Toggle switch
• SA : 3 positions; Alternate; Short lever
• SB : 3 positions; Alternate; Long lever
• SC : 3 positions; Alternate; Long lever
• SD : 3 positions; Alternate; Short lever
• SE : 3 positions; Alternate; Short lever
• SF : 2 positions; Alternate; Long lever
• SG : 3 positions; Alternate; Short lever
• SH : 2 positions; Momentary; Long lever
2 positions 3 positions
When you change switches (SE, SF, SG, SH):
To relocate switches;
1. Make sure your transmitter is off, and remove the
side rubber cover.
2. Use the driver to turn the screw counter-clockwise
on the switch block and detach the block.
Remove the screw holding the switch block. Pull
the switch block remove.
3. Disconnect the connectors of switches you want to
change.
4. Use the attached jig (inside stylus) to turn the
face nuts counterclockwise, this will detach the
switches.
13
Alternate Momentary
5. To re-attach, use the face nuts to attach switches
from other positions or optional switches to the
switch block.
6. Connect your connectors.
7. Insert the switch block so reconnect the connectors
and use the driver to tighten the screws.