Table of Contents
Advertisement
Operation modes
touching the Mode and Type buttons.
Linear hysteresis mode
This setting method selects function ON/OFF based
on the set point. Hysteresis (dead band) can be set
between ON and OFF. The ON and OFF positions
can be reversed with the Reverse button.
Symmetrical hysteresis mode
Operation is the same as the linear hysteresis
are symmetrical about the neutral position. For
right position.
Linear box mode
This mode turns on the switch within a range of
positions can be reversed with the Reverse switch.
Symmetrical box mode
but left and right (up and down) operation is
symmetrical about the neutral position.
＜ Data ＞
231
When shifting the ON/OFF point
The ON/OFF and hysteresis (dead band) boundary
be shifted. ON/OFF is possible at a free position.
Top point
1. Select the top and bottom boundary points with
2. Move the stick, etc. to the point you want to
points change.
Advertisement
Table of Contents
