Table of Contents
Advertisement
This function corrects slowing of the engine speed
caused by swash plate operation during aileron or
elevator operation. The method of applying clockwise
corrected.
An acceleration function which temporarily increases the
throttle side correction rate relative to rapid stick operation
can also be set.
When correction is necessary, touch the mixing
corresponding to the mixing that needs correction to call
the curve setup screen, and then correct the slowing.
to call the setup screen shown below.
Setting method
＜ Model Menu (Helicopter) ＞
187
Setting example
<Acceleration function setting>
rate.
be set.
rate is increased and decreased can be set
independently. When an operation point
performed.
Advertisement
Table of Contents
