Table of Contents
Advertisement
Door opens
Five sequencers can be set.
● The sequencer automatically uses program
mixing when configured. Use the unused
program mixing rear number (idx=xx). This
confirmation screen will appear, so tap "Yes" to
enable the settings.
＜ Model Menu (Common Functions) ＞
136
Gear down
The sequencer has three settings to choose from.
● Wheel/Basic Door
1.Gear down after a set time after the door opens.
2.The door closes after a set time after gearing up.
● Wheel/Cycle Door
1. Gear down after a set time after the door opens.
2. Door closes after a set time after gear down.
3. Gear up after a set time after the door opens.
4.The door closes after the set time after gearing up.
● Wheel/Boost Door
1. Gear down after a set time after the door opens.
2. Door closes after a set time after gear down.
3. Close the door strongly for the set time.
4. Gear up after a set time after the door opens.
5.The door closes after the set time after gearing up.
6. Close the door strongly for the set time.
● Wheel/Cycle door and Wheel/Boost Door use
two systems of program mixing.
Door closes
Once set, this display will appear.
Advertisement
Table of Contents
