Hiding The Ribbon; Display Colors - Stratasys Objet30 User Manual

Objet30 User Guide
Hiding the
To make more room for displaying the build tray, you can hide the Objet
Ribbon
Studio ribbons.
To hide the ribbons:
1. Right-click anywhere on the ribbon or on the menu bar, or in the Objet
2. Select Minimize the Ribbon.
To return the permanent ribbon display:
➢ Repeat the steps above to cancel Minimize the Ribbon.

Display Colors

You can customize some of the colors used for displaying Objet Studio screens
and for displaying objects on the build tray.
To change the colors used in Objet Studio screens:
1. From the Tools menu, select Options.
2. In the Appearance tab of the Options dialog box, you can configure the
DOC-34022 Rev. D
Studio Commands menu
The ribbons disappear, but you can temporarily display the ribbon icons by
clicking Tray Settings or Job Manager on the menu bar. When you next
click outside of the ribbon, it disappears again.
Figure 5-67 Display settings
display.
❒ The Mode selection determines how models appear on the build tray.
The default method for displaying models on the build tray is as solid
("shaded") objects. The other options are WireFrame and Points.
.
5 Using Objet Studio
5-52