Zoom Options - Stratasys Objet260 User Manual

Objet260 User Guide
7. To save these settings, so that they will be applied every time you place
8. Click Apply to see the results of the settings without closing the dialog box.
Selecting the Entire Object option cancels polygon reduction.
Object display options
The display format affects how quickly objects display. For example, if you
select Bounding Box, objects display faster than they do when you select
Entire Object. You can choose display formats for objects when they are
stationary (static view) and for when you are dragging them (changing view).
To select the object display preference while changing view, and in
static view:
1. Select to display objects:
2. Click OK when done.
Zoom Options
While manipulating objects, you often need to view them at different zoom
levels.
To change the zoom level:
➢ On the ribbon, open the Zoom flyout toolbar and select an option:
DOC-37004 Rev. J
❒ Bounding Box—A box representing the object's maximum dimensions
is displayed.
❒ Adaptive Polygon Reduction—Varying degrees of polygon reduction
are applied, as necessary.
❒ Entire Object—No polygon reduction is applied.
this object on the build tray, click Save Polygon Reduction Data.
❒ With a Bounding Box (see Figure 5-51 on page 5-45)
❒ With Adaptive Polygon Reduction (changing view only)
❒ With Polygon Reduction (static view only)
❒ Entire Object
Figure 5-65 Zoom flyout toolbar
❒ Zoom Object focuses on the selected object.
❒ Zoom Tray displays the whole tray.
5 Using Objet Studio
5-52