Installing The Cover - Siemens SICHARGE D Operating Instructions Manual
Hide thumbs
Also See for SICHARGE D:
- Product information (93 pages) ,
- Operating instructions manual (32 pages) ,
- Commissioning manual (30 pages)
Table of Contents
Advertisement
5.5.5.4
Installing the cover
The following operating instruction shows how to install the cover of the charging station.
1. Place the cover on the charging station.
Figure 5-23 Placing the cover
2. Screw in the cover with the ten M6x16 hexagon socket-head screws.
– Allen size is 4 mm
– The tightening torque is 3 Nm
Figure 5-24 Screwing down the cover
3. Click the filter cover first upwards and then downwards in the cabinet. Lock the quick
fasteners and install the rear device door again. Follow the same instructions as in figure 7
of the section Installing the roof and filter cover (Page 94).
SICHARGE D
Operating Instructions, 11/2023, A5E50556539-AG
Installation and mounting
5.5 Setting up the charging station
93
Advertisement
Table of Contents
