Charging Point Message "Out Of Operation - Siemens SICHARGE D Operating Instructions Manual

8.3

Charging point message "Out of operation"

If the controller detects that only one charging point is affected by an error, then only this
charging point is deactivated. The other charging points will continue to be available for
charging. This prevents a complete failure of the charging station.
In the menu for charging point selection, the deactivated charging point is highlighted in
color. "Out of order" is displayed as the status.
Figure 8-3 Charging point message "Out of operation"
NOTE
Shortly after the charging station has been started, the DC charging points are still displayed
as "Out of order" until the grouping and the fast shutdown check of the converters is
successfully completed. The charging points automatically switch to operational status after
passing checks.
SICHARGE D
Operating Instructions, 11/2023, A5E50556539-AG
Error messages and remedy
8.3 Charging point message "Out of operation"
121