Installation Location - Siemens SICHARGE D Operating Instructions Manual

Installation and mounting

5.2 Installation location

• EVSE tester
• Mini USB cable
• Ethernet cable
• Degreasing cleaner and cloth
5.2 Installation location
To operate the charging station safely, you need a location that meets the following
requirements.
Internet connection
The charging station needs a good, stable Internet connection to the SICHARGE Configuration
Backend as well as to the OCPP backend in order to function properly and fully. This is used,
among other things, to process safety-related updates and the possibility of billing the
charging processes. The quality of wireless connections depends on many factors, so it is not
possible to give generalized standard values here.
If the planned installation location is unsuitable for mobile radio, consider connecting the
router via WiFi or Ethernet. In case of uncertainty, contact your wireless provider.
You can find more information on the Internet
networks.com/view/Mobile_Signal_Strength_Recommendations).
Selection criteria for a safe location
Select the location of the charging station in such a way that all operations are safe. The
charging station itself must not pose a risk to persons or vehicles.
NOTE
Do not install the charging station in an open area
• Do not install the charging station in an open area without an interception rod or external
lightning protection. Otherwise, complete protection cannot be guaranteed.
• Comply with IEC 62305 if there is a risk of a direct lightning strike.
Noise emission
Select the location of the charging station in such a way that local requirements and
regulations are met. Example: Technical Instructions for Protection Against Noise (TA Noise)
(https://www.bfga.de/arbeitsschutz-lexikon-von-a-bis-z/fachbegriffe-s-u/ta-laerm-
fachbegriff/).
72
(https://wiki.teltonika-
Operating Instructions, 11/2023, A5E50556539-AG
SICHARGE D