Adding Coolant; Spare Parts - Siemens SICHARGE D Operating Instructions Manual
Hide thumbs
Also See for SICHARGE D:
- Product information (93 pages) ,
- Operating instructions manual (32 pages) ,
- Commissioning manual (30 pages)
Table of Contents
Advertisement
9.3.6
Adding coolant
NOTICE
Contact with coolant is harmful to health
Wear eye/face protection and chemical-resistant impervious gloves when working on the
cooling unit. In case of contact with the coolant, follow the instructions of the safety data
sheet of the coolant.
Follow these instructions for adding coolant.
Figure 9-9 Adding coolant
1. Open the closure of the coolant expansion tank
2. Add coolant until the sight glass is filled half way.
3. Close the coolant expansion tank with a maximum tightening torque of 1 Nm
4. Remove coolant residues
9.4
Spare parts
The order number of the spare part list is: 8EM5907-0AA00-2AA6. You can download the
spare part list here (https://support.industry.siemens.com/cs/ww/en/view/109814736).
These products are parts that are subject to wear:
• Filter mats
• Coolant
• Charging plug
• Charging plug holder
• Rope box and cable management system
SICHARGE D
Operating Instructions, 11/2023, A5E50556539-AG
Maintenance and service
9.4 Spare parts
133
Advertisement
Table of Contents
