Work Areas; Falling Parts; Risk Of Crushing Or Cuts - Siemens SICHARGE D Operating Instructions Manual

2.2.5

Work areas

Danger of tripping or slipping.
Keep work areas clean and tidy to prevent tripping and slipping.
If you allow the rope of the cable management system to protrude too far, there is a risk of
people tripping or falling.
Accident hazards
Avoid accidents and injuries to persons, as well as damage to vehicles and the SICHARGE D.
Accident hazards include:
• Inattention
• Danger of tripping or slipping.
• Vandalism
Provide additional protective measures, such as:
• Warning signs
• Safe location of SICHARGE D
• Barriers
• Training of drivers and operators
• Sufficient lighting
• Padlocks to protect against restarting
• Suitable weather protection
Safety area for mounting
Create a safety area around the installation area with warning signs and barriers.
2.2.6

Falling parts

When working at an elevated height, watch out for falling parts, cables or plugs.
2.2.7

Risk of crushing or cuts

When mounting, look out for moving parts, sharp-edged parts and protruding cables and
bolts.
The rope box of the cable management system is constantly under spring tension.
The rope box is a partly completed machine. Only use the rope box if it is professionally
installed and covered with the cover.
SICHARGE D
Operating Instructions, 11/2023, A5E50556539-AG
2.2 Hazards during transport, mounting, operation and maintenance
Safety instructions
17