Re-Attaching Protective Cover - Siemens SICHARGE UC 150 Operating Instructions Manual

Installation

5.6 Re-attaching protective cover

5.6 Re-attaching protective cover
Once you have finished working on the connections of the charging station, you must
reassemble the protective cover for the interior.
Mounting the protective cover
To fit the protective cover, proceed as follows:
1. Position the protective cover.
2. Tighten the fastening screws of the protective cover.
3. Replace the main switch handle on the handle extension.
46
Operating Instructions, 10/2022, A5E50068475-AB
SICHARGE UC 150