Goods Acceptance; Checking The Delivery For Completeness And Correctness; Inspect And Remove Transport Packaging; Report Missing Delivery Components Or Transport Damage - Siemens SICHARGE D Operating Instructions Manual

5.4

Goods acceptance

5.4.1

Checking the delivery for completeness and correctness

Perform an incoming goods inspection as soon as the goods are delivered. Check the goods
for completeness and correctness based on the delivery documents.
5.4.2

Inspect and remove transport packaging

Start the inspection of the transport packaging with the visual inspection. Any damage must
be promptly reported to and acknowledged by the carrier.
After the visual inspection, start to unpack the charging station.
NOTE
The transport packaging does not provide sufficient protection against the weather.
Completely remove all parts of the transport packaging and insert the charging plugs into the
corresponding holder in the door.
5.4.3

Report missing delivery components or transport damage

If you discover that the delivery is incomplete or that there is transport damage, document
the damage first. Then submit a damage report.
Documenting damage
Take immediate action to determine the exact extent, cause and origin of the damage. Take
immediate and appropriate measures to limit the damage.
In particular, document the damage as follows:
• Photograph the damage.
• Record all known information on the damaging event, e.g. location, time and date.
Report incomplete delivery or damaged delivery items
If the delivery is incomplete or damaged, inform the following persons immediately:
• Contact of the supplier (see delivery note)
• Contact of the purchaser (see delivery note)
• Person responsible for the transport company
You can find the list of the scope of delivery here:
• Charging station (Page 31)
• Cable management system (Page 32)
SICHARGE D
Operating Instructions, 11/2023, A5E50556539-AG
Installation and mounting
5.4 Goods acceptance
81