Servicing The Charging Station; Cleaning The Touch Screen - Siemens SICHARGE D Operating Instructions Manual

9.3

Servicing the charging station

9.3.1

Cleaning the touch screen

The touch screen is designed for low-maintenance operation. Clean the touch screen
regularly to ensure that the touch screen is in perfect condition.
Electric shock due to water ingress
Water entering the charging station can damage the charging station. If the unit is damaged,
dangerous voltages may be present on the cabinet or exposed components, which can cause
serious injury or death if touched.
• Always keep the cabinet doors closed during cleaning.
• Never use a high-pressure cleaner, steam jet or water jet when cleaning the charging
NOTICE
Damage to property due to improper cleaning agents
Improper cleaning agents can damage the touch screen of the charging station.
• Therefore, do not use solvents.
• Also, never use aggressive or abrasive cleaning agents.
NOTE
Cleaning the touch screen when it is switched on may result in operating errors. This can, for
example, cause ongoing charging processes to be interrupted unintentionally if no
authentication is set. Only clean the touch screen when no vehicle is charging.
Permitted cleaning agents and tools
• Use a mild, non-corrosive cleaning agent, even in the case of heavy soiling. Mild cleaning
agents are, for example, commercially available glass cleaners or a mixture of water and
vinegar (ratio 5:1).
• Use only soft cleaning cloths.
• Only in exceptional cases should you use sharp-edged tools, such as stove scrapers, to
carefully remove stubborn adhesive residues from the glass.
SICHARGE D
Operating Instructions, 11/2023, A5E50556539-AG
WARNING
station.
Maintenance and service
9.3 Servicing the charging station
125