Operation; Safety Instructions - Siemens SICHARGE D Operating Instructions Manual

Operation

The SICHARGE D charging station is operated via the touch screen. The individual operator
options and menu guidance are described in this section. The illustrations may differ slightly
depending on the firmware of the device.
7.1

Safety instructions

Observe the following safety instructions for safe operation of the charging station.
Operating the touch screen
The touch screen is the central display and operator control element of the charging station.
• Use only your fingers or a suitable stylus pen to operate the touch screen.
• Note the information provided in the section "Cleaning the touch screen (Page 125)".
NOTICE
Damage due to unsuitable objects
When you touch the touch screen with unsuitable objects, you reduce the service life of the
display. If there is severe damage, the touch screen can also fail.
In order not to damage the touch screen, follow the instructions below:
• Do not touch the touch screen with sharp or pointed objects.
• Avoid shock or impact with hard objects.
• Use only your fingers or a suitable stylus pen to operate the touch screen.
NOTE
Displays during ERK execution
The touch screen serves as an informative display. The calibration-relevant notices are
displayed on the left and right, at the side behind the viewing windows.
110
Operating Instructions, 11/2023, A5E50556539-AG
7
SICHARGE D