Qualified Personnel; Protection Against Unauthorized Opening - Siemens SICHARGE D Operating Instructions Manual

2.1.3

Qualified personnel

Qualified personnel
All work on the charging station may only be performed after having received the proper
instructions. Non-electrical work, e.g. transport and assembly, may only be performed by
qualified personnel. Qualified personnel are qualified by training and experience to recognize
risks arising during the respective work and to avoid possible hazards.
Electrical engineering work may only be performed by qualified electricians themselves or
under their direction and supervision. A qualified electrician is someone who is able to assess
the work assigned to them and recognize potential dangers due to their professional training,
knowledge and experience as well as knowledge of the relevant standards.
2.1.4

Protection against unauthorized opening

A lock system protects the charging station from unauthorized opening of the device doors at
the front and back.
• Keep the key for the door locks safe against access by unauthorized persons.
• Only make the key available to authorized personnel for work performed inside the
charging station.
• Do not leave the charging station unattended when the device door is open.
NOTE
The charging station is supplied with replaceable locking cylinders and matching keys. These
standard keys are located on the inside of the front door.
The operator must replace the locking cylinder as protection against unauthorized opening.
The operator must also keep the associated keys safely. The operator must provide service
personnel with access to the charging station for maintenance work.
Use different locking cylinders for each individual charging station. This ensures that each
charging station can only be opened by the matching key.
Replacing the locking cylinders
The charging station is supplied with replaceable locking cylinders (standard half
cylinders (10/30) according to DIN 18252) and matching keys. In the section "Locking system
& replacing the lock cylinders (Page 37)", you will find detailed instructions on how to replace
the locking cylinders.
SICHARGE D
Operating Instructions, 11/2023, A5E50556539-AG
Safety instructions
2.1 General
15