C
H A P T E R
This chapter describes some commands which you can perform in the User and Enable modes.
47.1 Overview
The following command examples show how you can use User and Enable modes to diagnose
and manage your switch.
47.2 show Commands
These are the commonly used
47.2.1 show system-information
Syntax:
show system-information
This command shows the general system information (such as the firmware version and
system up time).
An example is shown next.
sysname# show system-info
System Name
System Contact
System Location
Ethernet Address
ZyNOS F/W Version
RomRasSize
System up Time
Bootbase Version
ZyNOS CODE
Product Model
MS-7206 User's Guide
User and Enable Mode
commands.
show
: MM-7201
:
:
: 00:13:49:00:65:18
: V3.75(ABX.0)b7 | 1/23/2007
: 3370138
:
147:46:18 (32bbc4b ticks)
: V128ram | 04/03/2006
: RAS Jan 23 2007 11:53:22
: MM-7201
47
Commands
283