Installing A Front/Tertiary 2 Sff Nvme/Sas/Sata Stackable Drive Cage - HPE ProLiant DL380 Gen10 Plus User Manual

Installing a front/tertiary 2 SFF NVMe/SAS/SATA stackable drive cage

Installing a front/tertiary 2 SFF NVMe/SAS/SATA stackable drive cage
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have the following items available:
T-10 Torx screwdriver
The components included with the hardware option kit
This installation requires a universal media bay.
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
4. Remove the access panel .
5. Remove the front bay blank.
6. Remove the optical disc drive tray from the universal media bay.
Installing a front/tertiary 2 SFF NVMe/SAS/SATA stackable drive cage 164