Removing A Riser Cage - HPE ProLiant DL380 Gen10 Plus User Manual

Removing a riser cage

Removing a riser cage
About this task About this task
CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all AC power cords CAUTION:
before removing or installing the PCI riser cage.
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
4. Remove the access panel .
5. Remove the riser cage:
Primary and secondary riser cages
Tertiary riser cage
Removing a riser cage 59