Installing a front 2SFF NVMe/SAS/SATA Premium drive cage
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
•
T-10 Torx screwdriver
•
The components included with the hardware option kit
•
This installation requires a universal media bay.
Procedure
1.
Power down the server.
2.
Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3.
Do one of the following:
•
Extend the server from the rack.
•
Remove the server from the rack .
4.
Remove the access panel.
5.
Remove the front bay blank.
6.
Remove the optical disk drive tray from the universal media bay.
Hardware options installation
99