Installing A Hot-Plug Lff/Sff Sas, Sata Or Nvme Drive - HPE ProLiant DL20 Gen10 Plus User Manual

Installing a hot-plug LFF/SFF SAS, SATA or NVMe drive

Installing a hot-plug LFF/SFF SAS, SATA or NVMe drive
CAUTION: CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated CAUTION:
with either a component or a blank.
Procedure Procedure
1. If installed, remove the front bezel .
2. Remove the drive blank.
Retain the blank for future use.
LFF drive blank
SFF drive blank
3. Prepare the drive.
LFF drive
SFF drive
Installing a hot-plug LFF/SFF SAS, SATA or NVMe drive 93