HPE ProLiant DL380 Gen10 Plus User Manual page 120

System requirements for persistent memory module System requirements for
IMPORTANT: IMPORTANT:
Hewlett Packard Enterprise recommends that you implement best-practice configurations such as clustered
configurations for high availability (HA).
Before installing persistent memory modules, make sure that the following components and software are available:
A supported HPE ProLiant Gen10 Plus server or Synergy compute module using third-generation Intel Xeon Scalable processors.
For more information, see the product QuickSpecs on the Hewlett Packard Enterprise website
(https://www.hpe.com/support/persistentmemoryQS https://www.hpe.com/support/persistentmemoryQS).
HPE DDR4 Standard Memory RDIMMs or LRDIMMs (the number will vary based on your chosen configuration).
Supported firmware and drivers:
System ROM version 1.40 or later
Server Platform Services (SPS) Firmware version 04.04.04.053
HPE iLO 5 Firmware version 2.44
HPE Innovation Engine Firmware version 1.0.0.20 or later
Download the required firmware and drivers from the Hewlett Packard Enterprise website
(https://www.hpe.com/info/persistentmemory https://www.hpe.com/info/persistentmemory).
A supported operating system:
Windows Server 2016 with persistent memory drivers from Hewlett Packard Enterprise
Windows Server 2019
Red Hat Enterprise Linux 7.9 and later
Red Hat Enterprise Linux 8.2 and later
SUSE Linux Enterprise Server 12 SP5 and later
SUSE Linux Enterprise Server 15 SP2 and later
VMware vSphere 7.0 U2 and later
VMware vSphere 6.7 U3 with P03
Hardware and licensing requirements for optional encryption of the persistent memory modules:
HPE TPM 2.0 (local key encryption)
HPE iLO Advanced License (remote key encryption)
Key management server (remote key encryption)
For more information, see the Intel Optane persistent memory 200 series for HPE User Guide on the Hewlett Packard Enterprise website
(https://www.hpe.com/info/persistentmemory-docs https://www.hpe.com/info/persistentmemory-docs).
persistent memory module support support
System requirements for persistent memory module support 120