Installing An Energy Pack - HPE ProLiant DL380 Gen10 Plus User Manual

Installing an energy pack

Installing an energy pack
Prerequisites Prerequisites
Before installing this option, be sure you that have the components included with the hardware option kit.
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
a. Extending the server from the rack.
b. Removing the server from the rack.
4. Remove the access panel.
5. Install the energy pack and connect the energy pack cable.
6. Install the access panel .
7. Install the server in the rack.
8. Connect each power cord to the server.
9. Connect each power cord to the power source.
10. Power up the server.
Results Results
The installation is complete.
Installing an energy pack 109