HPE ProLiant DL380 Gen10 Plus User Manual page 91

4. Connect the power cord to the power supply.
5. Secure the power cord in the strain relief strap attached to the power supply handle:
a. Unwrap the strain relief strap from the power supply handle.
CAUTION: Avoid tight bend radii to prevent damaging the internal wires of a power cord or a server cable. Never CAUTION:
bend power cords and server cables tight enough to cause a crease in the sheathing.
b. Secure the power cord with the strain relief strap.
Roll the extra length of the strap around the power supply handle.
6. Connect the power cord to the power source.
7. Observe the power supply LED.
Installing a redundant hot-plug power supply 91