Table Of Contents - HPE ProLiant DL380 Gen10 Plus User Manual

1 Component identification
1.1 Front panel components
1.2 Front panel LEDs and buttons
1.2.1 UID button functionality
1.2.2 Front panel LED power fault codes
1.2.3 Systems Insight Display LEDs
1.2.4 Systems Insight Display combined LED descriptions
1.3 Rear panel components
1.4 Rear panel LEDs
1.5 System board components
1.5.1 Heatsink and socket components
1.5.2 DIMM label identification
1.5.3 Intel Optane persistent memory 200 series for HPE label identification
1.5.4 DIMM slot locations
1.5.5 System maintenance switch descriptions
1.6 Drive box identification
1.7 Drive numbering
1.8 HPE Basic Drive LED definitions
1.9 Fan bay numbering
1.10 DSC-25 2-port SFP28 card ports and LEDs
1.11 HPE NS204i-p NVMe OS Boot Device components
1.12 HPE NS204i-p NVMe OS Boot Device LED definitions
2 Operations
2.1 Power up the server
2.2 Power down the server
2.3 Extending the server from the rack
2.4 Secure cables using the cable management arm
2.5 Removing the server from the rack
2.6 Remove the access panel
2.7 Install the access panel
2.8 Removing the fan cage
2.9 Installing the fan cage
2.10 Removing the air baffle or midplane drive cage
2.11 Installing the air baffle
2.12 Removing a riser cage
2.13 Removing a riser slot blank
2.14 Removing the hard drive blank
2.15 Releasing the cable management arm
2.16 Accessing the Systems Insight Display
3 Setup
3.1 Optional services
3.2 Set up the server
3.2.1 Operational requirements

Table of contents

Table of contents