Secure Cables Using The Cable Management Arm - HPE ProLiant DL380 Gen10 Plus User Manual

Secure cables using the cable management arm

Secure cables using the cable management arm
About this task About this task
For rack rail installation instructions, see the documentation that ships with the rack rails.
WARNING: To reduce the risk of electric shock, fire, or damage to the equipment: WARNING:
Do not insert wrong connectors into ports.
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
Unplug the power cord from the power supply to disconnect power to the equipment.
Do not route the power cord where it can be walked on or pinched by items placed against it. Pay particular
attention to the plug, electrical outlet, and the point where the cord extends from the server.
Procedure Procedure
1. After the server is racked, connect any peripheral devices to the server.
To identify components, see Rear panel components.
2. At the rear of the server, plug in the power cord to the power supply.
3. Install the power cord anchors.
4. Secure the cables to the cable management arm.
IMPORTANT: Leave enough slack in each of the cables to prevent damage to the cables when the server is extended IMPORTANT:
from the rack.
Secure cables using the cable management arm 49