Enabling The Trusted Platform Module As Tpm 1.2 - HPE ProLiant DL380 Gen10 Plus User Manual

Enabling the Trusted Platform Module as TPM 1.2

Enabling the Trusted Platform Module as TPM 1.2
About this task About this task
Procedure Procedure
1. During the server startup sequence, press the F9 key to access System Utilities.
2. From the System Utilities screen select System Configuration > BIOS/Platform Configuration (RBSU) > Server Security > Trusted
Platform Module options.
3. Change the "TPM Mode Switch Operation" to TPM 1.2.
4. Verify that "TPM Visibility" is set to Visible.
5. Press the F10 key to save your selection.
6. When prompted to save the change in System Utilities, do one of the following:
If in graphical mode, click Yes.
If in text mode, press the Y key.
7. Press the ESC key to exit System Utilities.
The server reboots a second time without user input. During this reboot, the TPM setting becomes effective.
8. Enable TPM functionality in the OS, such as Microsoft Windows BitLocker or measured boot.
For more information, see the Microsoft website Microsoft website .
Enabling the Trusted Platform Module as TPM 1.2 208