Drive Options - HPE ProLiant DL380 Gen10 Plus User Manual

Drive options

Drive options
Depending on the configuration, this server supports SAS, SATA, NVMe, and M.2 drives. For more information on drive support, see the
product QuickSpecs.
When adding hard drives to the server, observe the following general guidelines:
The system automatically sets all device numbers.
For drive numbering, see Drive bay numbering.
If using only one hard drive, install it in the bay with the lowest device number.
To provide the greatest storage space efficiency, group identical capacity drives into the same drive array.
The NVMe SSD is a PCIe bus device. Do not remove NVMe drives without allowing the device to cease activity. Removing the drive
while active can cause data loss.
Subtopics Subtopics
Drive guidelines Drive guidelines
Installing a hot-plug SAS, SATA or NVMe drive Installing a hot-plug SAS, SATA or NVMe drive
Installing an M.2 drive Installing an M.2 drive
Drive options 127