HPE ProLiant DL380 Gen10 Plus User Manual page 191

Installing the HPE Installing the HPE NS204i-p NVMe OS Boot Device NS204i-p NVMe OS Boot Device option
Prerequisites Prerequisites
Before beginning installation, ensure that the server is updated with the latest operating system firmware and drivers.
About this task About this task
Procedure Procedure
Installing drives onto the boot device Installing drives onto the boot device
1. Remove the liner from the thermal interface pad.
2. Install the drives.
Installing the boot device Installing the boot device
3. Power down the system .
4. Do one of the following:
Extend the front drive cages out of the chassis .
Remove the system from the rack .
Remove the compute module from the enclosure.
option
Installing the HPE NS204i-p NVMe OS Boot Device option 191