Table of Contents
Advertisement
Energy pack option
Hewlett Packard Enterprise offers a centralized backup power source option to back up write cache content on P-class
Smart Array controllers in case of an unplanned server power outage.
One energy pack option can support multiple devices. An energy pack option is required for P-class Smart Array
controllers. Once installed, the status of the energy pack displays in HPE iLO. For more information, see the HPE iLO user
guide on the Hewlett Packard Enterprise website (https://www.hpe.com/support/ilo-docs).
HPE Smart Storage Battery
The HPE Smart Storage Battery supports the following devices:
•
HPE Smart Array SR controllers
•
HPE Smart Array MR controllers
A single 96W battery can support up to 24 devices.
After the battery is installed, it might take up to two hours to charge. Controller features requiring backup power are not
re-enabled until the battery is capable of supporting the backup power.
This server supports the 96W HPE Smart Storage Battery with the 145mm cable.
Installing an energy pack
Install the energy pack using the energy pack holder option kit compatible with the installed power supply:
Hardware options installation
73
Advertisement
Table of Contents
