Table of Contents
Advertisement
C h a p t e r 3 : C o n f i g u r i n g y o u r M a t r o x I r i s G T t o w o r k o n a n e t w o r k
5. Enter the MAC address of your Matrox Iris GT in the MAC Address text box.
6. Click on the Load button. The network settings currently in use are displayed
7. Enter the static IP address that your network administrator gave you in the Static
8. Enter the subnet mask that your network administrator gave you in the Subnet
9. Click on the Save button.
10. Close the Matrox IrisBootParams utility.
11. Disconnect the power supply from your Matrox Iris GT.
12. Disconnect your computer from your Matrox Iris GT, and connect your
13. Connect your Matrox Iris GT to your network.
14. Reconnect the power supply to your Matrox Iris GT and wait.
Note that the MAC address is written on a sticker attached to your Matrox Iris GT.
on-screen. Write them down for future reference. Deselect the DHCP option.
IP address text box.
text box.
computer to your network.
The power LED of your Matrox Iris GT should turn green and the user LED of
your Matrox Iris GT should be off. This indicates that your Matrox Iris GT uses
a statically assigned IP address and is ready to communicate with your network.
Advertisement
Table of Contents
