Table of Contents
Advertisement
2 0
C h a p t e r 2 : P o w e r i n g a n d c o n n e c t i n g t o y o u r M a t r o x I r i s G T
P o w e r i n g a n d c o n n e c t i n g t o y o u r M a t r o x
I r i s G T
The Matrox Iris GT has the following interfaces:
• Digital I/O and power connector. Used to receive power from an external power
source. The connector can also send/receive RS-232, trigger, strobe, and
user-defined I/O signals to/from third-party I/O devices.
• 100/1 GBase T connector. Provides connectivity between your Matrox Iris GT
and your computer or your network. Matrox Iris GT can gain access to a LAN
via Gbit Ethernet (GigE or 1000BaseT), fast Ethernet (100BaseT) or twisted pair
Ethernet (10BaseT).
• VGA/USB connector
a digital display device and/or USB device (such as a keyboard or a mouse).
If you have not purchased the Matrox Iris GT starter kit, refer to Matrox Iris GT
connectors section, in Appendix B: Technical Reference for the pinout of your Matrox
Iris GT's connectors and for parts/cable purchasing information.
1. Note that this connector is reserved for future expansion.
1
. Provides connectivity between your Matrox Iris GT and
Advertisement
Table of Contents
