Table of Contents
Advertisement
A p p e n d i x G : M a t r o x I r i s G T u t i l i t i e s
4. Click the Save button. This will change the settings of your Matrox Iris GT.
5. Reboot your Matrox Iris GT by unplugging it and then plugging it back in.
❖ Note that you should only use this utility if directed to do so by technical support.
1. On your computer, launch the Matrox Iris OS Downloader utility. From the
2. Click on the Browse button and navigate to the location of the NK.bin file. A
3. Click on the NK.bin file containing the operating system for your Matrox Iris GT
• Change the COM port settings by entering the new information in the COM
port parameters section.
Note that if you enable the COM Post option to display power on self-test
❖
diagnostics, you cannot use the serial port in your Matrox Design Assistant
project (specifically, the SerialPortReader and SerialPortWriter steps).
M a t r o x I r i s O S D o w n l o a d e r u t i l i t y
The Matrox Iris OS Downloader utility allows you to restore only the operating
system portion of your Matrox Iris GT from another computer on your network.
There is a backup copy of the operating system for your Matrox Iris GT in the
rescue folder of the Matrox Iris GT Utility CD.
To use this utility, perform the following:
Matrox Imaging submenu of the Windows Start menu, select Design Assistant
2.1 for Iris GT. From the presented submenu, click on Matrox OS Downloader.
The Matrox Iris OS Downloader utility opens.
copy of this file is available in the rescue folder of your Matrox Iris GT Utility CD.
(NK.bin), and press the Enter key. The download process begins.
Advertisement
Table of Contents
