Table of Contents
Advertisement
The files used to restore your Matrox Iris GT to its factory defaults are located in
the rescue folder of your Matrox Iris GT utilities CD. Note that you can move
these files to any location on your network, accessible by your Matrox Iris GT,
but if the files are renamed, the FullRescue utility will return an error.
❖ Note that it is strongly recommended that you save a copy of the Essential
Information page of the Matrox Iris portal website as a text file, before using the
FullRescue utility or upgrading the software for your Matrox Iris GT.
Before running this utility, you must stop any project running on your Matrox
Iris GT.
S y n t a x
\>FullRescue [DEFSET] [QUIET] [SharedFolder] [UserName] [Password]
P a r a m e t e r s
If you enter the command and all its parameters at the command line, you must
enclose any string containing spaces in quotations. If, however, you enter only the
name of the utility, you will be prompted to enter each parameter in turn without
quotations.
❖ When a required parameter (such as the user name) is not specified, the utility
will prompt you for the missing information.
• DEFSET. Specifies to retrieve the factory-configured set of boot parameters stored
on your Matrox Iris GT rather than copying the provided boot parameters from
the BootRom.ROM file in the specified network-shared folder.
• QUIET. Specifies that the FullRescue utility will run without requiring a user's
intervention.
• SharedFolder. Specifies the location that holds the rescue files, installed from the
Matrox Iris GT utilities CD. This location must be a network-shared folder and
be accessible by the user, specified by the UserName parameter of this utility. The
location must be entered in the following format:
\\server\share:folderpath
U t i l i t i e s i n s t a l l e d o n y o u r M a t r o x I r i s G T
1 2 3
Advertisement
Table of Contents
