Operation; Start Up; System Start Up - Emergency Off (Epo) Option - Webasto DVS100 Installation, Operation And Maintenance Manual

5 Operation

5.1

Start Up

When you first power up your Industrial PosiCharge
display will then show the initial Status Screen containing the model number, the software version
and the output current capability. After five seconds, the screen will shift to the charge screens.
System Start Up – Emergency Off (EPO) Option
5.2
With the external AC Input applied to the system, display panel switches on the ON position, press
the green ON button located on the front door assembly. See Figure 5- 1A.
Pressing the red OFF button terminates all output power. Pressing the green ON button restarts
the system.
In an Emergency, pressing the large, red Emergency OFF button will also remove all output power
and input power to the Control 230VAC and 24VAC accessory. Before restarting the system after
any emergency, be sure the system has been returned to a safe, operable condition before Pulling
EPO and pressing the ON button to restart the system.
20182-W-03-01
IMPORTANT INFORMATION – SAVE THESE INSTRUCTIONS
EMERGENCY
POWER OFF
A
Figure 5- 1A ON/OFF/EPO Front Panel Buttons
DVS100 Installation, Operation and Maintenance
™
, it will perform a lighting sequence test. The
OFF ON
13
B
Webasto Charging Systems, Inc.