Operation; Start Up; Language Selection; Figure 5- 1 Language Selection Screens - Webasto SVS300 Installation, Operation And Maintenance Manual

SVS-200

5 Operation

5.1

Start Up

When you first power up your Industrial PosiCharge
display will then show the initial Status Screen containing the model number, the software version
and the output current capability. After five seconds, the screen will shift to the charge screens.
5.2

Language Selection

At the "Charger Ready Connect Vehicle" Screen, a standard password shall be required to gain
entry to the Language Selection option.
In the "Charger Ready Connect Vehicle" screen, use the standard password to access the
language options. After password has been accepted the "Charger Ready Connect Vehicle"
screen will start flashing. Press the UP arrow and Hold to scroll through the language options,
release when desired language is displayed; Press ENTER to accept the desired language.
SVS300
Version
Charger Ready
Connect Vehicle
Charger Ready
Connect Vehicle
Chargeur Prêt
Relier le Véhicule
Ladegerät bereit
Fahrzg anschließen
Cargador Listo
Conecte el Vehículo
20153-W-03-01
IMPORTANT INFORMATION – SAVE THESE INSTRUCTIONS
500 Amps
3.00.00.00
US
Enter key code now, Hold key code until screen starts flashing
EU
ENTER
ENTER
ENTER

Figure 5- 1 Language Selection Screens

Installation, Operation and Maintenance
™
, it will perform a lighting sequence test. The
Press and Hold UP arrow to select language
preference and ENTER to accept the selection
made.
13 Webasto Charging Systems, Inc.