Output Format Selection Menu - Webasto DVS100 Installation, Operation And Maintenance Manual

Charge Time
Control
CLEAR
Auto Charge Restart
6 Hours

5.11.15 Output Format Selection Menu

The Output Format feature allows the user to select the format of their output data. The customers
using the IVECs system can select the "IDS Mode" while customers that are not using IVECs can
select "Standard Mode".
From the "Output Format Selection" screen, press <enter> to display the current data format.
Press <enter> again to enable editing. Use the <up> and <down> arrows to select the desired
data format for the Output Format display and press <enter> to save your configuration. Press
<clear> to exit.
CLEAR
20182-W-03-01
IMPORTANT INFORMATION – SAVE THESE INSTRUCTIONS
ENTER
Figure 5- 26 Charger Time Control Menu
Output Format
Selection
ENTER
CLEAR
Output Format is:
Standard Mode
Output Format is:
IDS Mode
Figure 5- 27 Output Format Selection Menu
DVS100 Installation, Operation and Maintenance
Charger Configuration
CLEAR
Press ENTER and use the UP and
DOWN arrow buttons to set the
parameter to the appropriate value.
ENTER
Press ENTER again to accept the
selection made.
Press CLEAR to retain the original value
CLEAR
41
Charger Configuration
Webasto Charging Systems, Inc.