Physical Installation - Webasto DVS100 Installation, Operation And Maintenance Manual

4.3

Physical Installation

CAUTION
The external dimensions of the DVS100 are:
- Base: 51,9 x 62,3 cm (20.44 x 24.50 in)
- Height: 130.7 cm (51.47 in)
Location
Choose your installation location to:

Avoid temperature and humidity extremes.

Minimize moisture and dust.

Provide adequate air circulation to prevent the buildup of fumes.

Install on a cement pad minimum 18cm (7") above surrounding curbing or walkways for water
flood control, see Figure 4- 1

Maintain a minimum of 46cm (18") of clearance on the sides of the unit for proper
ventilation.
 Maintain 91,5cm (36") minimum clearance on Front and Back for servicing as required by local
codes.
 Do not install unit where it will be exposed to direct sunlight.
20182-W-03-01
IMPORTANT INFORMATION – SAVE THESE INSTRUCTIONS
The DVS100 weighs 240 kg. Always use appropriate equipment for
handling the unit. Use a forklift of sufficient capacity to lift the unit.
Do not use hooks to lift the unit.
Do not tip the unit. It must be kept in vertical position.
DVS100 Installation, Operation and Maintenance
8 Webasto Charging Systems, Inc.