Charging; Table 5- 1 Led Labels And Meanings - Webasto DVS100 Installation, Operation And Maintenance Manual

5.4

Charging

Step 1: Connect battery to charger
To start charging, simply connect the battery to the charger. Once the charge starts, and the
"Charging" screen is displayed, the current is ramped up from zero to the target start current.
The display screen will periodically update the charging data as the charge progresses. In
addition, the front panel has several status LEDs which indicate the current status of the battery
under charge, and whether it is scheduled for an equalization charge.
20182-W-03-01
IMPORTANT INFORMATION – SAVE THESE INSTRUCTIONS
DVS100
Version
Charger Ready
Connect Vehicle
Vehicle connected
Getting config info
Preparing to charge
Please wait...
Preparing to charge
Please wait 30 sec
Charging
25.4V
Figure 5- 3 Connecting Status Screens
Figure 5- 4 Front Panel Layout

Table 5- 1 LED Labels and Meanings

DVS100 Installation, Operation and Maintenance
200 Amps
03.00.00.32
Vehicle Connected
Communication established Communication established
73%
150A 71F
15 Webasto Charging Systems, Inc.