Operation; Start Up; System Start Up - Emergency Off (Epo) Option; Figure 4-1: On/Off/Epo Front Panel Buttons - Webasto PosiCharge SVS100N Operation And Maintenance Manual

Operation

4

Start Up

4.1
During power up the Industrial PosiCharge
display will then show the initial Status Screen containing the model number, the software version
and the output current capability. After five seconds, the screen will shift to the charge screens.
System Start Up – Emergency Off (EPO) Option
4.2
With the external AC Input applied to the system, display panel switches on the ON position,
press the green ON button located on the front door assembly. See Figure 4-1.
Pressing the red OFF button terminates all output power. Pressing the green ON button
restarts the system.
In an Emergency, pressing the large, red Emergency OFF button will remove all output power
and 230VAC input power to the control board logic power supply. Before restarting the system
after any emergency, be sure the system has been returned to a safe, operable condition before
Pulling EPO and pressing the ON button to restart the system.
12876-W-03-01

Figure 4-1: ON/OFF/EPO Front Panel Buttons

SVS100N Operation/Maintenance Manual
TM
charger will perform a lighting sequence test. The
7
WARNING
NORMAL BATTLE
MODE
MODE
Webasto Charging Systems, Inc.