Settings; Dim Led Indicator; Operation; Overview - Webasto Next Operating And Installation Instructions

13 | Settings

13 Settings
NOTE
Setting the Webasto Next
You can adjust the settings of your Webasto Next using
the following options:
For installation:
● Webasto Charger Setup app
For operation and setting:
● Webasto ChargeConnect portal
● Webasto ChargeConnect app
● Integrated WebUI (configuration interface, see
chapter 9, "WebUI" on page 12)
13.1

Dim LED indicator

To dim the LED display of your Webasto Next, using the
Webasto ChargeConnect Portal (WCC) (https://
webastochargeconnect.com/) and follow the instructions.
Available from Q2, 2022.
14

Operation

14.1

overview

1
4
Fig. 21
1 LED indicator
2 Charging cable holder
3 Charging coupling holder
4 Installation cover
16 / 23
14.2
14.2.1
Fig. 22
Operating
indicator
WCH000072A
N1
N2
N3
N4
N5
2
N6
N7
N8
Table 3: Indicator lamps
3
WEM000107A

LED indicators

LED operating indicator
Description
LED not lit:
Charging station is off.
White chase light running up and down:
Charging station is starting up.
LED pulsing white:
Communications UI is starting.
LED is green:
Charging station is on standby.
LED pulsing blue:
Charging station being used; charging vehicle.
Blue chase light running up and down:
Charging coupling connected to the vehicle,
charging interrupted.
Green chase light running up and down:
The charging station is in operation but the "Scan
& Charge" function is locked.
Orange chase light running up and down:
Charging process interrupted by power supply
company.
5111232C OI-II Webasto Next_EN
WEM000077B