Operation; Getting Started - Webasto DVS300 Operation & Maintenance Manual

Intelligent Fast-Charging System
4 – OPERATION
4.1 – Getting Started
Take the time before you begin to familiarize yourself with section 1.2 Safety Instructions. Perform the following
steps to get your system up and running quickly.
1. Ensure that the Fast-Charging DVS installation and utility power requirements are followed. Refer to the
Intelligent Fast-Charging System Ground Support Equipment Installation Guide PN 31504-76.
2. Install the BMID onto the battery pack. Refer to the BMID I Installation Manual PN 11717-W-03 or BMID
III Battery Rx Installation Manual PN 16672-W-03.
The battery dealer or other authorized service technician, however, typically will install the BMID on the
battery pack and configure it before delivery to the customer.
Each BMID is pre-configured with the following information:
• An identification number, which can help track the charging history of a specific battery.
• A type code, which indicates the manufacturer and type of battery.
• The number of cells in the battery.
• The ampere-hour capacity of the battery.
• The start current limit of the battery pack for optimal charging.
• The battery SOC limit, which determines when the charging will stop.
• The internal resistance.
• The maximum ampere-hours between equalizations.
• The maximum days between equalizations.
• The equalization day of the week.
• The voltage limit for fast charging and equalization.
• The battery temperature foldback.
• The BMID initialization.
3. The battery pack may be connected to the charger (power station) once the BMID is installed.
4. Initialize the BMID if it (is new and) does not come pre-configured.
Refer to the BMID Programming Manual, Battery RX, SVS/ELT [PN 06701-W-03].)
BMIDs also may be reconfigured on site through the charger (power station) front panel. (Refer to the
BMID Programming Manual, Battery RX, SVS/ELT [PN 06701-W-03].)
5. The battery pack is ready to begin charging once the BMID has been initialized.
31504-03-0101
GSE O&M for DVS300 / 330 / 330 IP55 / 400 and MVS330/400
15 Webasto Charging Systems, Inc.